MARKOOL / COOLER SITE MEASUREMENT CHECKLIST
Revision: SITE-R01 / 2026-10-18
Use: collect placement information before selecting or ordering a cabinet.
This blank checklist is not an installation approval or a measurement record.

PROJECT
Company / brand:
Contact:
Destination country / city:
Store or placement group:
Number of sites / quantity:
Preferred model(s):
Product file / drawing revision:
Measured by / date:
Measurement unit (mm or inches):

For every value below, mark M = measured, E = estimated, D = document value.
Attach a front photograph, a side photograph and a dimensioned site sketch.
Leave unknown values blank or write UNKNOWN. Do not guess required clearances.

1. AVAILABLE POSITION
Placement: counter / freestanding floor / proposed enclosure / other:
Clear available width:
Clear available depth:
Clear available height:
Narrowest point / raised counter edge / overhead obstruction:
Nearby walls, tills, signs, queue barriers or equipment:
Intended customer viewing direction:
Expected access: customer / staff / both:

2. CABINET OUTSIDE SIZE
Exact model and configuration:
Outside W x D x H from current document:
Source document / revision:
Does the value include handle, hinge, feet/castors and header? Confirm:
Other projections or accessories:
Counter/floor support information and who will approve the loaded weight:

3. OPENING AND REPLENISHMENT
Door hinge side or lid arrangement:
Required door/lid opening position and drawing reference:
Space for handle and door/lid movement:
Space needed to remove shelves/baskets for cleaning:
Access to rear/bottom stock:
Staff replenishment route:
Nearby doors / queue / customer route conflicts:
Applicable site access requirements reviewed by:

4. VENTILATION AND OPERATING CONDITIONS
Current installation instruction / configuration reference:
Air inlet and outlet locations:
Required rear clearance (from model-specific instructions):
Required side clearance (from model-specific instructions):
Required top/front clearance (from model-specific instructions):
Space for service panel and condenser access:
Proposed enclosure permission confirmed by / document:
Typical / highest observed ambient temperature:
Observed humidity and time of measurement:
Direct sun / nearby heat / entrance exposure:
Opening frequency and busy periods:
Overnight air-conditioning / operation routine:

5. POWER AND SITE ACCESS
Destination voltage / frequency / plug requirement:
Outlet position and access:
Electrical configuration and connection to be confirmed by:
Unloading location / handling equipment:
Narrowest doorway W x H:
Corridor width / tightest turn:
Lift entrance and internal dimensions / load information:
Steps / ramps / thresholds / overhead restrictions:
Packed W x D x H / shipping weight / packaging revision:
Agreed unpacking point:
Permitted handling orientation and startup instructions confirmed by:

6. PRODUCT SPACE
Package list attached? yes / no:
For each pack: max diameter OR W x D, total height including cap, filled weight:
Required product holding condition, supplied by product owner:
Target front facings by SKU:
Required stock between refills:
Clear shelf/basket dimensions and measurement source:
Intrusions, shelf supports, dividers and air paths:
Shelf positions / clear heights / load limits and their document source:
Removal and restocking trial needed:

7. OPEN ITEMS BEFORE PURCHASE
Question / owner / evidence needed / due date:
1.
2.
3.

REVIEW BOUNDARY
Outside dimensions are not usable internal dimensions or full installation space.
The six-model R02 loading files are authored design targets: their calculated
clear-space requirements are not measured cabinet capacity or verified fit.
Do not use an R02 target as a tested loading or cooling result.
Use the exact model's installation instructions; no universal clearance is given.

NEXT STEP
Guide: https://markool.com/resources/commercial-refrigerator-dimensions
Package planning: https://markool.com/pack-out-planning
Request free pack-out planning:
https://markool.com/contact?request=document&document=Pack-out%20drawings

Completing or saving this file does not send an enquiry.