MK-PT-SH-CH-AG Chrome Wire Shelf for Four-Sided Glass Coolers — product view

01 / 01

MARKOOL model · MK-PT-SH-CH-AG

Wire Shelf for Four Sided Glass Coolers

For a shelf in a glass display cabinet, identify the viewing sides and the actual loading side.

Component format: Chrome-plated wire shelf for four-sided glass layouts
Interface to match: Clearance to all glazed sides and the cabinet's support seats.

Category: Parts and Components
Configuration: Made to project dimensions; options confirmed in your quotation
Sales response: Within one business day

Your next decision

Measure all sides, corners and cut-outs.

Compare with Chrome Wire Shelf for Back Bar Coolers →Check replacement fit →See available information ↓

Project configuration

Configure your component.

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

Plan shelf visibility from each aisle

For a shelf in a glass display cabinet, identify the viewing sides and the actual loading side. Send a pack layout showing the label direction and clearance around the deck.

What to review on a sample

Review the arrangement from each customer approach, then retrieve a pack through the intended opening. Confirm support locations and loaded stability separately.

Plan the quality review →

MARKOOL model: MK-PT-SH-CH-AG
Project choices: Chrome-plated shelf sizing for a four-sided glass cabinet.
Component format: Chrome-plated wire shelf for four-sided glass layouts
Layout reference: Near-square wire deck with a perimeter frame.
Fit and mounting: Clearance to all glazed sides and the cabinet's support seats.
Supply definition: Shelf component; specify supports and fittings in the bill of materials.
Dimensions and acceptance: Width/depth, corner geometry, wire diameter/pitch, frame section, support spacing and loaded acceptance criteria. Numerical values are confirmed on the agreed drawing and inspection plan.

Component decision

Match the task and the interface.

Compare a nearby catalogue option, then use the checks below to define your request. Each record keeps its own drawing, configuration and supply scope.

01 / Check the interface

Three details to confirm

Measure all sides, corners and cut-outs.
Show supports and gaps to glass or cabinet walls.
Supply pack layout and required shelf load.

02 / Compare an alternative

MK-PT-SH-CH-AG · Ref. 114 or MK-PT-SH-CH-BB · Ref. 113?

The near-square glass-cabinet shelf has a different perimeter task from the flat-rear back-bar shelf. Compare measured outline and support positions; near-square is not a size specification.

MK-PT-SH-CH-AG · Ref. 114: Request the record-specific dimension drawing
MK-PT-SH-CH-BB · Ref. 113: Request the record-specific dimension drawing

Reference component dimensions do not establish host compatibility. Match mounting, supports and the agreed assembly drawing.

Review MK-PT-SH-CH-BB · Ref. 113 →

Keep catalogue reference 114 attached to the request, especially when model labels are shared.

Request MK-PT-SH-CH-AG ↗

Plan the first order

Define the part before the price.

Quantity, dimensions, materials, mounting hardware and any tooling determine the component quotation. The picture identifies the format; the agreed drawing and item list define the supplied part.

Ask the quote to separate: product and included fittings; sample or tooling; branding; inspection/documents; packing/parts; freight and named delivery place.

Full terms, payment and lead-time conditions →

Information for this model

See what you can use now.

Model buying briefDownload now · TXT

Save this record’s published values, comparison notes, supply questions and product-view links in one editable file.

Download MK-PT-SH-CH-AG · Ref. 114 ↓

RFQ checklistDownload now

Fill in your requirements, save a copy and share it with your RFQ.

Download checklist ↓

Model datasheet and dimension drawingAvailability on request

A public revision is not listed here. Specify the host opening and mounting interface so the applicable file or missing details can be identified.

Request this model's technical file →

Installation and service instructionsAvailability on request

Identify the exact model, destination and purpose. The response confirms the applicable revision or what still needs to be prepared.

Request applicable instructions →

Selection boundary

Confirm fit before approval.

Match all four edges and support points while allowing clearance from the glazed cabinet walls.

01Host cabinet model and opening or support dimensions

02Material, profile and mounting geometry

03Quantity and replacement tolerance

04Packing, handling and destination requirements

Configuration and supply

Know what you are asking us to quote.

01 / PRODUCT SCOPE

The part and its fittings

Shelf component; specify supports and fittings in the bill of materials.

The quotation itemizes the supplied configuration and included accessories.

02 / OPTIONS TO DISCUSS

Finish and interface choices

Coordinate shelf-edge accessories without hiding the four-sided display.

Selected options are confirmed for this model before sample approval.

Discuss these options →

03 / INPUTS FOR YOUR QUOTE

Help us match the host

Measure all sides, corners and cut-outs.
Show supports and gaps to glass or cabinet walls.
Supply pack layout and required shelf load.

Request this configuration →

What happens next: the first response identifies the proposed configuration, the information needed to price it and the applicable files available for review. Sales response: within one business day.

Before you order

How should I measure a shelf inside a glass cabinet?

Provide outside shelf outline and clear cabinet space separately. Mark every support and the required gaps to surrounding panels so fit is assessed without assuming panel contact.

What needs to be confirmed before ordering?

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

What can be customized?

Chrome-plated shelf sizing for a four-sided glass cabinet. Changes affecting structure, performance or electrical interfaces require a separate technical review and written approval.

What determines the quotation?

The selected configuration, quantity, artwork, electrical or component interfaces, packing and delivery scope determine the offer. Send your package or fit dimensions, destination and quantity. Sample and pilot terms depend on the platform; request a project-specific quotation rather than assuming a fixed online price.

Procurement confirmation

Eight inputs prevent avoidable rework.

Send the information that defines product fit, destination setup, selected options and delivery scope for your quotation.

01Quantity and rollout estimate
02Stored product or package dimensions
03Destination country or market
04Host product and installation dimensions
05Material or fit requirement
06Colour, artwork or branding input
07Delivery region and access constraints
08Required documents or customization

Back to Parts and Components →OEM service workflow →Open the buyer center →

Request MK-PT-SH-CH-AG

Send the product context with the RFQ.

The model, internal product record and page URL are attached automatically. Add quantity, market, pack or fit dimensions and customization requirements.

Sales response standardWithin one business dayQualified requests · Monday–Friday, excluding public holidays.

PRODUCT QUOTEStart with the essentials.

Share your contact, destination, product and quantity. Choose a sample or an estimate if your rollout is still being planned; technical details can follow.

Selected productMK-PT-SH-CH-AGParts and Components · Ref. 114

Name *Work email *

Company *Destination market *

Product model *Estimated quantity *

Check replacement fit — measurements and photos

Download blank measurement worksheet ↓

Measurements are optional at this stage. Label the part and cabinet measurements separately. Matching appearance does not confirm compatibility.

Part to matchMeasurement unit

No dimensions yet? Leave measurements blank and send your question.

Show the complete part and its attachment to the host. Label overall dimensions, mounting centres and any connector or mating profile.

Host cabinet and existing part reference

Overall part widthOverall part height / thicknessOverall part depth / length

Mounting / support centres and mating profileOpening dimensions, intended load and included fittingsPhoto / marked-up drawing link (optional)

Helpful views: the whole part; a ruler beside each measured edge; mounting details; the host opening and model label. The reply should identify the proposed part, drawing revision, included fittings and unanswered fit questions.

Add timing or technical details (optional)

Phone / WhatsApp

Buyer typeTarget timeline

Product, package or fit dimensions

Branding / customization requirementsProject details

Your request is sent only when you submit.

By submitting, you agree that MARKOOL may use these details to respond to your request. Read our privacy policy. Share only files you are authorized to provide.

Optional measurement preferences

Allow campaign attribution and anonymous interaction signals for this tab session (optional). Your name, email and message are not included in these signals. Browser privacy signals take precedence.

MK-PT-SH-CH-AGRequest quote ↗