Start an RFQ ↗
Home / Products / Parts and Components / MK-PT-SM-SR-N01
MK-PT-SM-SR-N01 Spring-Loaded Roller Shelf for Beverage Refrigerators — product view01 / 01

MARKOOL model · MK-PT-SM-SR-N01

Spring Loaded Roller Shelf for Beverage Fridges

For a spring-assisted roller shelf, define the pack range, lane count and required movement as one assembly brief.

Component format
Spring-loaded roller shelf arrangement
Interface to match
Host shelf seating, pusher travel and front stops.
Request a Quote ↗Configuration & supply
Category
Parts and Components
Configuration
Made to project dimensions; options confirmed in your quotation
Sales response
Within one business day

Your next decision

Supply pack sizes, weights and lane count.

Compare with Gravity Roller Shelf for Beverage Fridges →Check replacement fit →See available information ↓

Project configuration

Configure your component.

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

Review the combined roller and pusher setup

For a spring-assisted roller shelf, define the pack range, lane count and required movement as one assembly brief. Request an itemised deck, spring, divider and stop configuration.

What to review on a sample

Review feeding and replenishment with full and near-empty lanes. Record the accepted component combination and repeat relevant pack checks if a part is substituted.

Plan the quality review →
MARKOOL model
MK-PT-SM-SR-N01
Project choices
Combine metal roller lanes with spring pushers for forward feeding on a level shelf. Specify lane dimensions, dividers and front retention together, then check movement with the lightest and heaviest packs.
Component format
Spring-loaded roller shelf arrangement
Layout reference
Roller lanes combined with spring-driven pushers.
Fit and mounting
Host shelf seating, pusher travel and front stops.
Supply definition
Roller/pusher arrangement; itemize springs, dividers, stops and mounting fittings.
Dimensions and acceptance
Roller layout, width/depth, lane spacing, spring force/travel, package mass/base and actual-pack feed acceptance criteria. Numerical values are confirmed on the agreed drawing and inspection plan.

Component decision

Match the task and the interface.

Compare a nearby catalogue option, then use the checks below to define your request. Each record keeps its own drawing, configuration and supply scope.

01 / Check the interface

Three details to confirm

  • Supply pack sizes, weights and lane count.
  • Confirm roller layout, spring travel and stops together.
  • Review movement and restocking at full and last-pack load.
02 / Compare an alternative

MK-PT-SM-SR-N01 · Ref. 142 or MK-PT-SM-RL-N01 · Ref. 138?

This record combines rollers and a spring; the gravity alternative uses a different movement method. Compare the same packs and lanes, including the separate pusher if a roller deck is unnecessary.

MK-PT-SM-SR-N01 · Ref. 142
Request the record-specific dimension drawing
MK-PT-SM-RL-N01 · Ref. 138
Request the record-specific dimension drawing

Reference component dimensions do not establish host compatibility. Match mounting, supports and the agreed assembly drawing.

Review MK-PT-SM-RL-N01 · Ref. 138 →

Keep catalogue reference 142 attached to the request, especially when model labels are shared.

Request MK-PT-SM-SR-N01 ↗

Plan the first order

Define the part before the price.

Quantity, dimensions, materials, mounting hardware and any tooling determine the component quotation. The picture identifies the format; the agreed drawing and item list define the supplied part.

Ask the quote to separate: product and included fittings; sample or tooling; branding; inspection/documents; packing/parts; freight and named delivery place.

Full terms, payment and lead-time conditions →

Information for this model

See what you can use now.

Model buying briefDownload now · TXT

Save this record’s published values, comparison notes, supply questions and product-view links in one editable file.

Download MK-PT-SM-SR-N01 · Ref. 142 ↓
RFQ checklistDownload now

Fill in your requirements, save a copy and share it with your RFQ.

Download checklist ↓
Model datasheet and dimension drawingAvailability on request

A public revision is not listed here. Specify the host opening and mounting interface so the applicable file or missing details can be identified.

Request this model's technical file →
Installation and service instructionsAvailability on request

Identify the exact model, destination and purpose. The response confirms the applicable revision or what still needs to be prepared.

Request applicable instructions →

Selection boundary

Confirm fit before approval.

Check the spring force, roller arrangement, pack weight and front-stop geometry together.

01Host cabinet model and opening or support dimensions
02Material, profile and mounting geometry
03Quantity and replacement tolerance
04Packing, handling and destination requirements

Configuration and supply

Know what you are asking us to quote.

01 / PRODUCT SCOPE

The part and its fittings

Roller/pusher arrangement; itemize springs, dividers, stops and mounting fittings.

The quotation itemizes the supplied configuration and included accessories.

02 / OPTIONS TO DISCUSS

Finish and interface choices

Review lane identification and shelf-edge artwork for the selected assembly.

Selected options are confirmed for this model before sample approval.

Discuss these options →
03 / INPUTS FOR YOUR QUOTE

Help us match the host

  • Supply pack sizes, weights and lane count.
  • Confirm roller layout, spring travel and stops together.
  • Review movement and restocking at full and last-pack load.
Request this configuration →

What happens next: the first response identifies the proposed configuration, the information needed to price it and the applicable files available for review. Sales response: within one business day.

Before you order

Why review the roller and spring together?

Movement depends on the combined deck, force, lane and stop geometry. Record them together during sample review so a later substitution receives the appropriate compatibility check.

What needs to be confirmed before ordering?

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

What can be customized?

Combine metal roller lanes with spring pushers for forward feeding on a level shelf. Specify lane dimensions, dividers and front retention together, then check movement with the lightest and heaviest packs. Changes affecting structure, performance or electrical interfaces require a separate technical review and written approval.

What determines the quotation?

The selected configuration, quantity, artwork, electrical or component interfaces, packing and delivery scope determine the offer. Send your package or fit dimensions, destination and quantity. Sample and pilot terms depend on the platform; request a project-specific quotation rather than assuming a fixed online price.

Configuration options

One family, controlled choices.

Each option keeps its own model and inquiry value. Specifications are not combined across variants.

MK-PT-SM-SR-N01 Spring-Loaded Roller Shelf for Beverage Refrigerators configuration view
MK-PT-SM-SR-N01 · 143

MK-PT-SM-SR-N01 Spring-Loaded Roller Shelf for Beverage Refrigerators

Identify Ref. 143 with the shared spring-roller model label. Request the lane arrangement, spring travel, front stops and supplied components shown for this configuration.

Request the dimensions, drawing and relevant operating or load requirements for Ref. 143; no numerical fields are listed for this configuration.

Request this configuration →
MK-PT-SM-SR-N01 Spring-Loaded Roller Shelf for Beverage Refrigerators configuration view
MK-PT-SM-SR-N01 · 144

MK-PT-SM-SR-N01 Spring-Loaded Roller Shelf for Beverage Refrigerators

For Ref. 144, supply the stocked pack assortment and weights. Review rollers, spring mechanism, dividers and stopping together; the stocked view does not establish load or movement results.

Request the dimensions, drawing and relevant operating or load requirements for Ref. 144; no numerical fields are listed for this configuration.

Request this configuration →

Procurement confirmation

Eight inputs prevent avoidable rework.

Send the information that defines product fit, destination setup, selected options and delivery scope for your quotation.

  1. 01Quantity and rollout estimate
  2. 02Stored product or package dimensions
  3. 03Destination country or market
  4. 04Host product and installation dimensions
  5. 05Material or fit requirement
  6. 06Colour, artwork or branding input
  7. 07Delivery region and access constraints
  8. 08Required documents or customization
Back to Parts and Components →OEM service workflow →Open the buyer center →

Related products

Refine your shortlist.

Explore related formats in this category. Check dimensions and operating requirements separately for each model; a related product is not automatically interchangeable.

Request MK-PT-SM-SR-N01

Send the product context with the RFQ.

The model, internal product record and page URL are attached automatically. Add quantity, market, pack or fit dimensions and customization requirements.

Sales response standardWithin one business dayQualified requests · Monday–Friday, excluding public holidays.
PRODUCT QUOTEStart with the essentials.

Share your contact, destination, product and quantity. Choose a sample or an estimate if your rollout is still being planned; technical details can follow.

Selected productMK-PT-SM-SR-N01Parts and Components · Ref. 142
Check replacement fit — measurements and photosDownload blank measurement worksheet ↓

Measurements are optional at this stage. Label the part and cabinet measurements separately. Matching appearance does not confirm compatibility.

No dimensions yet? Leave measurements blank and send your question.

Show the complete part and its attachment to the host. Label overall dimensions, mounting centres and any connector or mating profile.

Helpful views: the whole part; a ruler beside each measured edge; mounting details; the host opening and model label. The reply should identify the proposed part, drawing revision, included fittings and unanswered fit questions.

Add timing or technical details (optional)
Your request is sent only when you submit.
By submitting, you agree that MARKOOL may use these details to respond to your request. Read our privacy policy. Share only files you are authorized to provide.
Optional measurement preferences
MK-PT-SM-SR-N01Request quote ↗