Three details to confirm
- Check sliding-door overlap and reach at both ends.
- Provide the bottle and can assortment and bar opening.
- Confirm ventilation, track cleaning and maintenance access.
01 / 03MARKOOL model · MK-CR-BB-D02-SD
Sliding Door Back Bar Fridge
Back-bar service areas where two sliding doors help avoid a hinged door projecting into the aisle.
- Reference dimensions
- 900x520x900 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
- Reference loading
- 256 bottles at 330 ml or 342 cans at 250 ml
- Category
- Commercial Refrigerators
- Configuration
- Standard model; options confirmed in your quotation
- Sales response
- Within one business day
Your next decision
Check sliding-door overlap and reach at both ends.
Model specifications
Check the fit. Define the details.
Use the recorded values for MK-CR-BB-D02-SD as a starting point for the drawing review.
Compare the listed configuration with your space and product requirements. Your quotation and approved drawing confirm selected options, installation requirements and any additional technical details.
- MARKOOL model
- MK-CR-BB-D02-SD
- Reference temperature
- 2 to 8°C (35 to 46°F)
- Reference dimensions
- 900x520x900 mm
- Reference loading
- 256 bottles at 330 ml or 342 cans at 250 ml
Model decision
Compare access, placement and pack-out.
Compare a nearby catalogue option, then use the checks below to define your request. Each record keeps its own drawing, configuration and supply scope.
MK-CR-BB-D02-SD · Ref. 030 or MK-CR-BB-D02-HD-SS · Ref. 034?
The stainless hinged-door record lists the same reference dimensions but a different door architecture. Compare projection, reach and materials; bottle and can counts are different pack formats, not a capacity ranking.
- MK-CR-BB-D02-SD · Ref. 030
- 900x520x900 mm
- MK-CR-BB-D02-HD-SS · Ref. 034
- 900x520x900 mm
Reference cabinet dimensions do not define an installation opening. Request the selected model's clearances and access drawing.
Review MK-CR-BB-D02-HD-SS · Ref. 034 →Another format to compare
Also compare the single hinged-door back-bar cabinet when the opening and staff aisle allow its door travel. Check its own bottle layout, ventilation and service drawing; the sliding-door record does not establish fit for the hinged cabinet.
Compare MK-CR-BB-D01-HD · Ref. 028 →Keep catalogue reference 030 attached to the request, especially when model labels are shared.
Request MK-CR-BB-D02-SD ↗Plan the first order
Start with a sample or a pilot.
1-unit evaluation sample
Standard sample: 2–5 working days after payment and configuration confirmation.
Eligible standard-platform pilot: from 20 units
Standard production: 30–35 calendar days after deposit and required specification, artwork and component readiness.
Deep customization: typically 50 units
Per model and artwork. Customized sample: 10–15 working days after technical, artwork and material release.
These are planning baselines. Eligibility, the selected configuration and shipping time are confirmed in your quotation.
Ask the quote to separate: product and included fittings; sample or tooling; branding; inspection/documents; packing/parts; freight and named delivery place.
Full terms, payment and lead-time conditions →Information for this model
See what you can use now.
Model buying briefDownload now · TXT
Save this record’s published values, comparison notes, supply questions and product-view links in one editable file.
Download MK-CR-BB-D02-SD · Ref. 030 ↓RFQ checklistDownload now
Fill in your requirements, save a copy and share it with your RFQ.
Download checklist ↓Model datasheet and dimension drawingAvailability on request
A public revision is not listed here. Specify the intended installation and destination so the applicable file or missing details can be identified.
Request this model's technical file →Installation and service instructionsAvailability on request
Identify the exact model, destination and purpose. The response confirms the applicable revision or what still needs to be prepared.
Request applicable instructions →Selection boundary
Confirm fit before approval.
Sliding doors do not expose the whole cabinet at once; review overlap, shelf access and cleaning needs.
01Pack dimensions and target facings
02Target temperature and operating environment
03Cabinet footprint, access and ventilation
04Destination voltage, frequency and required documents
Configuration and supply
Know what you are asking us to quote.
01 / PRODUCT SCOPE
The cabinet and its equipment
Identify this sliding-door cabinet and chosen shelf and lock arrangement. Installation and loading approval must use its own drawing and actual pack mix.
The quotation itemizes the supplied configuration and included accessories.
02 / OPTIONS TO DISCUSS
Your brand and product layout
Review permitted fascia graphics and finish without interfering with door tracks.
Selected options are confirmed for this model before sample approval.
Discuss these options →03 / INPUTS FOR YOUR QUOTE
Help us check the placement
- Check sliding-door overlap and reach at both ends.
- Provide the bottle and can assortment and bar opening.
- Confirm ventilation, track cleaning and maintenance access.
What happens next: the first response identifies the proposed configuration, the information needed to price it and the applicable files available for review. Sales response: within one business day.
Procurement confirmation
Eight inputs prevent avoidable rework.
Send the information that defines product fit, destination setup, selected options and delivery scope for your quotation.
- 01Quantity and rollout estimate
- 02Stored product or package dimensions
- 03Destination country or market
- 04Voltage and frequency
- 05Target temperature and operating environment
- 06Colour, artwork or branding input
- 07Delivery region and access constraints
- 08Required documents or customization
Related products
Refine your shortlist.
Explore related formats in this category. Check dimensions and operating requirements separately for each model; a related product is not automatically interchangeable.
MK-CR-BB-D03-SD
Three Door Sliding Back Bar Fridge
Wide back-bar beverage storage with three sliding access doors.
- Reference dimensions
- 1350x520x900 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-BB-D02-HD-SS
Stainless Steel Two Door Back Bar Fridge
Hospitality installations seeking a two-door stainless-finish beverage cabinet.
- Reference dimensions
- 900x520x900 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-BB-D01-HD
One Door Underbar Fridge
Hospitality buyers planning a single-door beverage cabinet around a measured underbar opening.
- Reference dimensions
- 600x520x900 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-UC-N1600-D03SD
Three Door Sliding Beverage Cooler
Wide retail beverage displays where sliding-door access is preferred.
- Reference dimensions
- 1710x700x2025 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
Request MK-CR-BB-D02-SD
Send the product context with the RFQ.
The model, internal product record and page URL are attached automatically. Add quantity, market, pack or fit dimensions and customization requirements.
Sales response standardWithin one business dayQualified requests · Monday–Friday, excluding public holidays.