Three details to confirm
- Describe service and replenishment on both sides.
- Send the opening and front and rear clearance drawings.
- Request separate dimensions, loading, temperature and power data for the chosen W model.
01 / 01MARKOOL model · MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520
Pass Through Bar Refrigerator
For a pass-through refrigerator enquiry, send a counter plan showing the staff side, customer side and available access space.
- Category
- Commercial Refrigerators
- Configuration
- Select a variant; configuration confirmed in your quotation
- Sales response
- Within one business day
Your next decision
Describe service and replenishment on both sides.
Project configuration
Check the fit. Define the details.
Cabinet dimensions, capacity, temperature range, electrical ratings and packing data are confirmed for the selected variant. Include the full model designation in your request.
Plan a two-sided service counter
For a pass-through refrigerator enquiry, send a counter plan showing the staff side, customer side and available access space. Identify the drinks, refill route and selected model before defining the cabinet layout.
What to review on a sample
Walk through replenishment and collection with the intended packs. Record door movement, reach and staff clearance on the selected layout; agree installation clearances against its drawing.
Plan the pack layout →- MARKOOL model
- MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520
- Project choices
- Plan front and rear access around serving and replenishment. Select the cabinet variant first, then review shelf layout, branding and the electrical configuration for the destination.
- Access arrangement
- Front and rear access separates serving from restocking. Plan both door paths, staff reach and the route for replenishment.
- Family selection
- Use the complete model designation when requesting the specification sheet. Confirm cabinet dimensions and usable shelf layout for that variant before setting the pack count.
- Installation interface
- Provide the counter opening and surrounding equipment layout. The selected cabinet drawing must establish ventilation, door movement and service clearances before installation is approved.
Model decision
Compare access, placement and pack-out.
Compare a nearby catalogue option, then use the checks below to define your request. Each record keeps its own drawing, configuration and supply scope.
MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520 · Ref. 011 or MK-CR-BB-D01-HD · Ref. 028?
The W370, W390 and W520 family supports a two-sided service brief. The single hinged-door back-bar record has a different access task. Select a family member before comparing dimensions or loading; those figures are absent from the family record.
- MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520 · Ref. 011
- Request the record-specific dimension drawing
- MK-CR-BB-D01-HD · Ref. 028
- 600x520x900 mm
Reference cabinet dimensions do not define an installation opening. Request the selected model's clearances and access drawing.
Review MK-CR-BB-D01-HD · Ref. 028 →Keep catalogue reference 011 attached to the request, especially when model labels are shared.
Request MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520 ↗Plan the first order
Start with a sample or a pilot.
1-unit evaluation sample
Standard sample: 2–5 working days after payment and configuration confirmation.
Eligible standard-platform pilot: from 20 units
Standard production: 30–35 calendar days after deposit and required specification, artwork and component readiness.
Deep customization: typically 50 units
Per model and artwork. Customized sample: 10–15 working days after technical, artwork and material release.
These are planning baselines. Eligibility, the selected configuration and shipping time are confirmed in your quotation.
Ask the quote to separate: product and included fittings; sample or tooling; branding; inspection/documents; packing/parts; freight and named delivery place.
Full terms, payment and lead-time conditions →Information for this model
See what you can use now.
Model buying briefDownload now · TXT
Save this record’s published values, comparison notes, supply questions and product-view links in one editable file.
Download MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520 · Ref. 011 ↓RFQ checklistDownload now
Fill in your requirements, save a copy and share it with your RFQ.
Download checklist ↓Model datasheet and dimension drawingAvailability on request
A public revision is not listed here. Specify the intended installation and destination so the applicable file or missing details can be identified.
Request this model's technical file →Installation and service instructionsAvailability on request
Identify the exact model, destination and purpose. The response confirms the applicable revision or what still needs to be prepared.
Request applicable instructions →Selection boundary
Confirm fit before approval.
Choose one exact model from the recorded family and check both door clearances before approval.
01Pack dimensions and target facings
02Target temperature and operating environment
03Cabinet footprint, access and ventilation
04Destination voltage, frequency and required documents
Configuration and supply
Know what you are asking us to quote.
01 / PRODUCT SCOPE
The cabinet and its equipment
State W370, W390 or W520 in the quotation with its drawing, doors, shelving and power package. A family label alone is insufficient for production release.
The quotation itemizes the supplied configuration and included accessories.
02 / OPTIONS TO DISCUSS
Your brand and product layout
Use permitted solid surfaces; keep the two access paths and glazing clear.
Selected options are confirmed for this model before sample approval.
Discuss these options →03 / INPUTS FOR YOUR QUOTE
Help us check the placement
- Describe service and replenishment on both sides.
- Send the opening and front and rear clearance drawings.
- Request separate dimensions, loading, temperature and power data for the chosen W model.
What happens next: the first response identifies the proposed configuration, the information needed to price it and the applicable files available for review. Sales response: within one business day.
Procurement confirmation
Eight inputs prevent avoidable rework.
Send the information that defines product fit, destination setup, selected options and delivery scope for your quotation.
- 01Quantity and rollout estimate
- 02Stored product or package dimensions
- 03Destination country or market
- 04Voltage and frequency
- 05Target temperature and operating environment
- 06Colour, artwork or branding input
- 07Delivery region and access constraints
- 08Required documents or customization
Related products
Refine your shortlist.
Explore related formats in this category. Check dimensions and operating requirements separately for each model; a related product is not automatically interchangeable.
MK-CR-MF-C012
Slim Glass Door Mini Fridge
Narrow countertop placements where cabinet width and a small beverage assortment matter more than a large display.
- Reference dimensions
- 230x520x510 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-MF-C028
Glass Door Mini Fridge for Retail
Countertop beverage displays that need a clear product view and a compact cabinet footprint.
- Reference dimensions
- 350x440x490 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-MF-C090
Countertop Glass Door Beverage Cooler
Counter placements that need a taller beverage display than a low mini fridge.
- Reference dimensions
- 430x525x760 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
MK-CR-MF-L050-LB
Custom Mini Fridge with Lightbox
Branded beverage campaigns that need a compact cooler and a prominent header in one configuration.
- Reference dimensions
- 420x460x805 mm
- Reference temperature
- 2 to 8°C (35 to 46°F)
Request MK-CR-PT-W370, MK-CR-PT-W390 and MK-CR-PT-W520
Send the product context with the RFQ.
The model, internal product record and page URL are attached automatically. Add quantity, market, pack or fit dimensions and customization requirements.
Sales response standardWithin one business dayQualified requests · Monday–Friday, excluding public holidays.