MK-PT-SH-WD-WC Slatted Wooden Shelf for Wine Cooler Cabinets — product view

01 / 01

MARKOOL model · MK-PT-SH-WD-WC

Slatted Wooden Shelf for Wine Coolers

For a slatted wine shelf, send bottle dimensions, orientation and the cabinet support layout.

Component format: Flat slatted wooden shelf
Interface to match: Cabinet seating, support spacing and clearance above loaded bottles.

Category: Parts and Components
Configuration: Made to project dimensions; options confirmed in your quotation
Sales response: Within one business day

Your next decision

Send bottle diameter, length and orientation.

Compare with Wooden Wine Cooler Shelf with Metal Rails →Check replacement fit →See available information ↓

Project configuration

Configure your component.

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

Arrange bottles on a wooden shelf

For a slatted wine shelf, send bottle dimensions, orientation and the cabinet support layout. State the wood finish and accessible cleaning surfaces required for the project.

What to review on a sample

Review narrow and broad bottle bases on the proposed slat arrangement. Check rocking, clearances and removal, then identify the approved finish sample and drawing.

Plan the quality review →

MARKOOL model: MK-PT-SH-WD-WC
Project choices: Configure shelf size, slat layout and finish around your wine bottles. Select a fixed support arrangement for this flat shelf; request a rail-equipped design separately if pull-out access is needed.
Component format: Flat slatted wooden shelf
Layout reference: Flat wooden deck with parallel slats.
Fit and mounting: Cabinet seating, support spacing and clearance above loaded bottles.
Supply definition: Wooden shelf; sliding rails are not established by this flat-shelf picture.
Dimensions and acceptance: Wood species/finish, width/depth, slat section/gap, support span and loaded acceptance criteria. Numerical values are confirmed on the agreed drawing and inspection plan.

Component decision

Match the task and the interface.

Compare a nearby catalogue option, then use the checks below to define your request. Each record keeps its own drawing, configuration and supply scope.

01 / Check the interface

Three details to confirm

Send bottle diameter, length and orientation.
Show supports and door clearance.
Specify wood and finish requirements.

02 / Compare an alternative

MK-PT-SH-WD-WC · Ref. 120 or MK-PT-SH-WD-WC · Ref. 121?

This record describes flat wood slats; the other has metal side rails. They share a model label but are separate records with different supply and support questions.

MK-PT-SH-WD-WC · Ref. 120: Request the record-specific dimension drawing
MK-PT-SH-WD-WC · Ref. 121: Request the record-specific dimension drawing

Reference component dimensions do not establish host compatibility. Match mounting, supports and the agreed assembly drawing.

Review MK-PT-SH-WD-WC · Ref. 121 →

Keep catalogue reference 120 attached to the request, especially when model labels are shared.

Request MK-PT-SH-WD-WC ↗

Plan the first order

Define the part before the price.

Quantity, dimensions, materials, mounting hardware and any tooling determine the component quotation. The picture identifies the format; the agreed drawing and item list define the supplied part.

Ask the quote to separate: product and included fittings; sample or tooling; branding; inspection/documents; packing/parts; freight and named delivery place.

Full terms, payment and lead-time conditions →

Information for this model

See what you can use now.

Model buying briefDownload now · TXT

Save this record’s published values, comparison notes, supply questions and product-view links in one editable file.

Download MK-PT-SH-WD-WC · Ref. 120 ↓

RFQ checklistDownload now

Fill in your requirements, save a copy and share it with your RFQ.

Download checklist ↓

Model datasheet and dimension drawingAvailability on request

A public revision is not listed here. Specify the host opening and mounting interface so the applicable file or missing details can be identified.

Request this model's technical file →

Installation and service instructionsAvailability on request

Identify the exact model, destination and purpose. The response confirms the applicable revision or what still needs to be prepared.

Request applicable instructions →

Selection boundary

Confirm fit before approval.

Check shelf size, slat spacing, support points and bottle clearance; the deck has no formed bottle cradles.

01Host cabinet model and opening or support dimensions

02Material, profile and mounting geometry

03Quantity and replacement tolerance

04Packing, handling and destination requirements

Configuration and supply

Know what you are asking us to quote.

01 / PRODUCT SCOPE

The part and its fittings

Wooden shelf; sliding rails are not established by this flat-shelf picture.

The quotation itemizes the supplied configuration and included accessories.

02 / OPTIONS TO DISCUSS

Finish and interface choices

Review wood finish and separately specified shelf labels.

Selected options are confirmed for this model before sample approval.

Discuss these options →

03 / INPUTS FOR YOUR QUOTE

Help us match the host

Send bottle diameter, length and orientation.
Show supports and door clearance.
Specify wood and finish requirements.

Request this configuration →

What happens next: the first response identifies the proposed configuration, the information needed to price it and the applicable files available for review. Sales response: within one business day.

Before you order

Why include reference 120 with the model name?

A second wooden-shelf record uses the same model label. Record number and drawing distinguish the flat slatted shelf from the version with metal side rails.

What needs to be confirmed before ordering?

Made to the agreed component drawing. Dimensions, interfaces and material selections are set for the project; working loads and performance limits are confirmed for the selected assembly.

What can be customized?

Configure shelf size, slat layout and finish around your wine bottles. Select a fixed support arrangement for this flat shelf; request a rail-equipped design separately if pull-out access is needed. Changes affecting structure, performance or electrical interfaces require a separate technical review and written approval.

What determines the quotation?

The selected configuration, quantity, artwork, electrical or component interfaces, packing and delivery scope determine the offer. Send your package or fit dimensions, destination and quantity. Sample and pilot terms depend on the platform; request a project-specific quotation rather than assuming a fixed online price.

Procurement confirmation

Eight inputs prevent avoidable rework.

Send the information that defines product fit, destination setup, selected options and delivery scope for your quotation.

01Quantity and rollout estimate
02Stored product or package dimensions
03Destination country or market
04Host product and installation dimensions
05Material or fit requirement
06Colour, artwork or branding input
07Delivery region and access constraints
08Required documents or customization

Back to Parts and Components →OEM service workflow →Open the buyer center →

Request MK-PT-SH-WD-WC

Send the product context with the RFQ.

The model, internal product record and page URL are attached automatically. Add quantity, market, pack or fit dimensions and customization requirements.

Sales response standardWithin one business dayQualified requests · Monday–Friday, excluding public holidays.

PRODUCT QUOTEStart with the essentials.

Share your contact, destination, product and quantity. Choose a sample or an estimate if your rollout is still being planned; technical details can follow.

Selected productMK-PT-SH-WD-WCParts and Components · Ref. 120

Name *Work email *

Company *Destination market *

Product model *Estimated quantity *

Check replacement fit — measurements and photos

Download blank measurement worksheet ↓

Measurements are optional at this stage. Label the part and cabinet measurements separately. Matching appearance does not confirm compatibility.

Part to matchMeasurement unit

No dimensions yet? Leave measurements blank and send your question.

Show the complete part and its attachment to the host. Label overall dimensions, mounting centres and any connector or mating profile.

Host cabinet and existing part reference

Overall part widthOverall part height / thicknessOverall part depth / length

Mounting / support centres and mating profileOpening dimensions, intended load and included fittingsPhoto / marked-up drawing link (optional)

Helpful views: the whole part; a ruler beside each measured edge; mounting details; the host opening and model label. The reply should identify the proposed part, drawing revision, included fittings and unanswered fit questions.

Add timing or technical details (optional)

Phone / WhatsApp

Buyer typeTarget timeline

Product, package or fit dimensions

Branding / customization requirementsProject details

Your request is sent only when you submit.

By submitting, you agree that MARKOOL may use these details to respond to your request. Read our privacy policy. Share only files you are authorized to provide.

Optional measurement preferences

Allow campaign attribution and anonymous interaction signals for this tab session (optional). Your name, email and message are not included in these signals. Browser privacy signals take precedence.

MK-PT-SH-WD-WCRequest quote ↗