Skip to main content

Commercial refrigeration · B2B model selection

Back bar refrigerators for a working service aisle.

Choose a commercial bar fridge around the way staff serve, restock and clean. Compare single-door, sliding-door and stainless steel formats, then check the counter opening, ventilation route and bottle layout. Pass-through access is a separate workflow choice when preparation and service happen on opposite sides.

Sliding Door Back Bar Fridge
MK-CR-BB-D02-SD · view model details →

Models in this format

Compare access before choosing cabinet width.

These models represent different service layouts. Shortlist from the catalogue references, then confirm the exact model, doors and installation drawing in the quotation.

Dimensions and temperature values on model cards are catalogue references. Confirm the selected configuration, usable space and destination requirements in the quotation.

Before shortlisting

Choose around the placement and the product.

A single service position

Start with 028 when one compact storage position suits the bar plan. Mark the hinge side and the full door-opening path on the layout. Include standing space, nearby equipment and shelf-removal access.

A busy aisle with sliding access

Compare 030 and 032 when outward door projection would obstruct the working aisle. Check the track, handles and loading routine with the actual bottle mix; overlapping doors limit simultaneous shelf access.

An enclosed stainless service cabinet

Review 034 when a stainless exterior and enclosed beverage storage suit the installation. Confirm the finish specification and cleaning method separately. Appearance does not establish material grade or cleaning-chemical compatibility.

Preparation and service on opposite sides

Review the 011 pass-through family for a two-sided handoff. Identify the exact family member in the offer. Allow access on both sides and describe the expected service routine.

Compare the buying options

Match access, display and operating needs.

Selection trade-offs for back bar refrigerators for a working service aisle.
Buying choiceMARKOOL starting pointWhat the layout must resolve
Single hinged door028Hinge side, door travel and one-person service space
Two sliding glass doors030Track access, visible stock and overlapping door openings
Wide sliding glass cabinet032Refill route, cabinet bay and access along the bar
Stainless two-door cabinet034Door clearance, finish specification and cleaning access
Pass-through family011Exact model, front and rear access, counter interface

Measure the counter bay and the route into it.

Record the narrowest opening, worktop underside, pipework, sockets and adjacent doors. Confirm feet or castors, levelling allowance, cable exit and the space required for service removal before the joinery is fixed.

Do not assume that every undercounter bar fridge is suitable for a closed built-in bay. Ask for the selected model's air intake and discharge locations and required clearances. Describe nearby heat sources and whether cabinetry could obstruct airflow. Confirm this arrangement in the installation proposal rather than borrowing a clearance from another cooler.

Check delivery doors, steps and turns as well as the final opening. Establish who positions, connects and commissions the cabinet, and how maintenance access will remain available.

Plan the service load, not just a total bottle count.

List the real bottles and cans with their outside dimensions. Separate upright bottles, tall packs and fast-moving lines. Decide which products staff should reach without rearranging other stock. A catalogue can-count reference does not establish your mixed-bottle layout or the usable height of each shelf.

Describe the refill schedule and whether stock enters already chilled. Ask to review shelf positions, restraints and the spaces that must remain clear for airflow. If the cabinet will store products with specific handling requirements, provide those requirements before selecting the temperature configuration; beverage presentation alone does not establish suitability for every food.

Request the cabinet, installation scope and support together.

Send the shortlisted model, quantity, destination, electrical supply, counter drawing and pack list. Identify hinged or sliding access, finish, lock and any branding requirement. Ask the offer to distinguish the cabinet configuration from optional artwork, packing, freight and installation work, so competing quotations describe the same supply scope.

For repeat orders, request component identification, spare-parts scope and support responsibilities. Confirm sample availability, quantities and timing against the named model and final drawing revision.

Buyer questions

Resolve the details before comparing quotations.

Is a sliding-door bar fridge always better in a narrow aisle?

It avoids an outward door swing, which may help the layout. Check how the overlapping doors affect access to shelves and larger packs. Compare actual service and refill movements.

Can these refrigerators be built into a sealed counter?

Only after the selected model's ventilation and service requirements have been reviewed. Provide the counter drawing and ask for the intake, discharge and access arrangement. An undercounter description is not approval for a sealed enclosure.

Does a stainless finish mean the cabinet is suitable for outdoor use?

No outdoor rating follows from its appearance. Confirm the installation environment, material specification and applicable operating conditions for the exact offered cabinet.

Can one model family be ordered with different door access?

Identify the required arrangement in the RFQ and have the exact offered model confirmed. The pass-through family and the single-sided bar cabinets should not be treated as interchangeable configurations without a specific review.

What should a distributor include in a back bar refrigerator RFQ?

Include model quantities, installation type, power supply, destination, bottle and can dimensions, door arrangement and finish. Add documentation, packing and spare-parts requirements so the quotation covers both the equipment and its intended support scope.

Prepare a comparable quotation

Send the model and the conditions it must meet.

Share the bar layout, service direction, actual packs, quantities and destination. Add your preferred door arrangement so the proposed model and installation scope can be reviewed together.

Request a model recommendation ↗

Include in your enquiry

  • Selected model or format, quantity and intended application
  • Package dimensions, loading pattern and refill routine
  • Installation opening, door access and ventilation constraints
  • Target storage conditions and shop operating environment
  • Destination, electrical supply and required arrival date
  • Branding, packing and shipment scope to price separately

Review sample, quantity and shipment terms →

Analytics onPrivacy