Start an RFQ ↗
Products / Compare

Build your shortlist

Find the differences.
Choose your next step.

Choose a product type and format, then compare up to three models. Your shortlist travels with one enquiry; dimensions and operating requirements are checked for each model.

Your shortlist 0/3

Selections stay in this page URL, so you can bookmark or share this comparison.

Select a model below to start comparing.

Available models (56)

Formats help narrow the catalogue. A matching format does not establish installation fit or operating performance.

Countertop display · Ref. 001

Slim Glass Door Mini Fridge

Narrow countertop placements where cabinet width and a small beverage assortment matter more than a large display.

Countertop display · Ref. 002

Glass Door Mini Fridge for Retail

Countertop beverage displays that need a clear product view and a compact cabinet footprint.

Countertop display · Ref. 004

Custom Mini Fridge with Lightbox

Branded beverage campaigns that need a compact cooler and a prominent header in one configuration.

Top-access / impulse · Ref. 007

Open Top Impulse Beverage Cooler

Impulse beverage placements where shoppers need direct top access to the assortment.

Top-access / impulse · Ref. 008

Oval Glass Lid Beverage Cooler

Retail island placements that need an elongated top-view beverage display.

Countertop display · Ref. 009

Four Sided Glass Mini Display Fridge

Counter displays viewed from more than one direction, with merchandise visible through the cabinet sides.

Back bar / pass-through · Ref. 011

Pass Through Bar Refrigerator

For a pass-through refrigerator enquiry, send a counter plan showing the staff side, customer side and available access space. Identify the drinks, refill route and selected model before defining the cabinet layout.

Upright display · Ref. 020

Single Door Cooler with Custom Lightbox

Beverage retail programs that need an upright display, clear product facings and coordinated campaign visibility.

Upright display · Ref. 023

Double Door Cold Drink Fridge

Multi-SKU beverage displays that need two hinged access doors and a broad merchandising area.

Back bar / pass-through · Ref. 028

One Door Underbar Fridge

Hospitality buyers planning a single-door beverage cabinet around a measured underbar opening.

Back bar / pass-through · Ref. 030

Sliding Door Back Bar Fridge

Back-bar service areas where two sliding doors help avoid a hinged door projecting into the aisle.

Glass doors · Ref. 102

Metal Framed Glass Door for Beverage Coolers

Start a metal-framed replacement door enquiry with the cabinet opening, hinge locations and sealing face. Include the existing assembly reference and the fittings you need supplied.

Glass doors · Ref. 106

Glass Refrigerator Door with Full Length Handle

For a glass door with a full-length handle, include the grip projection and neighbouring fixtures in the fit brief. Specify handing and the required opening route as well as the door outline.

Glass doors · Ref. 108

PVC Framed Glass Door for Beverage Refrigerators

For a PVC-framed glass door enquiry, provide the frame section, sealing interface and desired finish. Review the profile fit and colour as separate decisions.

Shelves, baskets and trays · Ref. 113

Chrome Wire Shelf for Back Bar Coolers

Define a back-bar wire shelf around the actual bottle bases, support positions and bartender access. Send a loaded layout rather than relying on the empty shelf outline.

Shelves, baskets and trays · Ref. 114

Wire Shelf for Four Sided Glass Coolers

For a shelf in a glass display cabinet, identify the viewing sides and the actual loading side. Send a pack layout showing the label direction and clearance around the deck.

Shelves, baskets and trays · Ref. 115

Commercial Refrigerator Wire Shelf

For an upright refrigerator wire shelf, provide the support system, required levels and packs assigned to each level. Include coating and cleaning requirements in the enquiry.

Shelves, baskets and trays · Ref. 116

Round Wire Basket for Can Shaped Coolers

For a round cooler basket, specify the pack mix, usable storage space and available removal route. State whether staff need to lift the basket empty or with products inside.

Shelves, baskets and trays · Ref. 117

Radial Basket Divider for Barrel Coolers

For a barrel cooler divider, sketch the product groups in a top view and identify the host basket or cabinet. Specify divider height and attachment independently of the container.

Shelves, baskets and trays · Ref. 118

PVC Coated Wire Basket for Chest Freezers

For a chest-freezer basket, identify the rim or support rails, lid clearance and products stored beneath it. Include the frozen packs and intended stocking routine in the brief.

Shelves, baskets and trays · Ref. 119

Stainless Wire Shelf for Undercounter Fridges

For a stainless wire shelf enquiry, name the required grade and finish and describe the cleaning routine. Provide the cabinet supports and proposed shelf load for the same configuration.

Shelves, baskets and trays · Ref. 120

Slatted Wooden Shelf for Wine Coolers

For a slatted wine shelf, send bottle dimensions, orientation and the cabinet support layout. State the wood finish and accessible cleaning surfaces required for the project.

Shelves, baskets and trays · Ref. 121

Wooden Wine Cooler Shelf with Metal Rails

For a wooden shelf with side rails, show the cabinet fixing points and specify fixed or pull-out access. Include bottle height and the available door opening in the fit brief.

Shelves, baskets and trays · Ref. 122

Wooden Display Crates for Beverage Coolers

For wooden display crates, provide the pack arrangement, cabinet opening and intended removal method. Include a branding brief only where a marked wood surface is required.

Shelves, baskets and trays · Ref. 123

Sliding Wooden Tray for Wine and Drinks Coolers

For a sliding wooden display tray, specify the desired access position, bottle layout and clear door opening. Treat guides, stops and mounting parts as items to confirm in the offer.

Shelves, baskets and trays · Ref. 124

Solid Metal Shelves for Open Front Coolers

For a solid metal display shelf, provide the product facings, bracket layout and host cooler clearances. Mark where shelf-edge information should sit relative to the packs.

Shelves, baskets and trays · Ref. 125

Illuminated Shelves for Open Air Refrigerators

For a shelf with front lighting, define the visible fascia area, graphic requirements and available power connection. List the light source, driver, wiring and service access in the requested scope.

Shelves, baskets and trays · Ref. 126

Wave Wire Wine Rack Shelf for Glass Fridges

For a wave wire bottle rack, provide the smallest and largest bottle envelopes, intended orientation and cabinet supports. Include shoulder shape and label contact in the layout review.

Shelves, baskets and trays · Ref. 128

Four Tier Acrylic Can Rack for Refrigerators

For a four-tier display insert, assign packs to each proposed level and show the available cabinet space. Define the viewing direction and retrieval route before confirming step dimensions.

Shelves, baskets and trays · Ref. 129

Acrylic Refrigerator Display Riser

For a display riser enquiry, provide the pack bases, target presentation height and customer viewing position. Specify the required number of steps for this project.

Clips and price holders · Ref. 131

Replacement Refrigerator Shelf Clips

For replacement shelf clips, identify the rail, shelf edge and clip together. Provide slot measurements, required support count and details of any handed parts.

Clips and price holders · Ref. 132

Clear Shelf Edge Price Tag Holder for Fridges

For a shelf-edge label holder, send the label size, insertion direction and shelf-edge section. Include barcode or promotional artwork where readability matters.

Shelves, baskets and trays · Ref. 133

Black Wire Shelf with Price Tag Rail

For a wire shelf with a label rail, show the pack facings and required label positions. Specify whether the order includes the rail, a clear holder and printed labels.

Shelves, baskets and trays · Ref. 134

Perforated Refrigerator Shelf for Bottles

For a perforated shelf, provide the actual package bases, load arrangement and support points. Request a deck layout that can be reviewed within the host cabinet configuration.

Shelves, baskets and trays · Ref. 135

Two Tier Hook Display Insert for Refrigerators

For a hook display insert, send the package hanging feature, filled weight and required rows. Show the host mounting points and any need for supporting ledges.

Dividers, rollers and pushers · Ref. 136

Adjustable Wire Divider for Refrigerator Shelves

For refrigerator shelf dividers, provide the pack widths, lane depth and expected assortment changes. Identify the shelf attachment and required divider quantity.

Dividers, rollers and pushers · Ref. 138

Gravity Roller Shelf for Beverage Fridges

For a gravity roller shelf enquiry, provide package-base dimensions, filled weights and available shelf space. Define the required facing and replenishment behaviour before selecting lane geometry.

Dividers, rollers and pushers · Ref. 140

Refrigerator Shelf Pusher System

For a shelf pusher enquiry, provide the lightest and heaviest packs, lane depth and front-stop arrangement. Identify flexible or easily dented packaging in the intended range.

Dividers, rollers and pushers · Ref. 142

Spring Loaded Roller Shelf for Beverage Fridges

For a spring-assisted roller shelf, define the pack range, lane count and required movement as one assembly brief. Request an itemised deck, spring, divider and stop configuration.

Looking for a wine, subzero, freezer or display project?

Explore the relevant category to define its configuration.

Wine →Subzero →Freezers →POP displays →